DV Mark DV40 112 Combo (40w Guitar Amp)

DV40 112 Combo (40w Guitar Amp)
Find similar products
Need assistance? Call 020 7432 4400


The DV40 112 is a 1x12", two-channel, 40W all-tube combo, equipped with EL34 power tubes.

Get great clean tone on channel 1 and rich tube saturation from channel 2.

Tonal options are almost endless thanks to DV Mark’s patent pending Continuous Power Control (CPC), which allows you to change the power incrementally from the full 40W (class A/B) gradually all the way down to 1W (class A) in pentode mode; or 15W (class A/B) to 0.5W (class A) in triode mode.

Plug into this combo and you’ll immediately hear its quality: very clean sounds even at high volumes, great crunchy rhythm tone, rich saturation, boost switch for lead playing, balanced response in all frequency ranges and impressive bass response—even from the 1x12”! The range of tonal options is incredible, and it’s easy to find your own sound quickly using EQ and the very practical CPC feature.

The DV40 112's other optional patent pending feature is the Advanced Tube Control System, which allows users to connect the amp to a computer, and—using custom software—collect technical data and tube parameters from the amp.

Power output (CPC):
> pentode: 1 ÷ 40W
> triode: 0.5 ÷ 15W

Preamp tubes: 2 x ECC83

Power tubes: 2 x EL34, 1 x ECC83

Channels: two

> Gain
> Master
> Presence
> Bright
> Solo
> Continuous Power Control (CPC)

EQ controls: Low – Mid – High (passive)

Speaker outputs:
> One 4 ohm
> One 8 ohm
> One 16 ohm

Other features:
> Input 1 (Hi Z: 1 MΩ)
> Input 2 (Low Z: -6 dB)
> Bias (low/high switch)
> Service ATCS interface (optional)
> Accutronics® spring reverb

Speaker size: 1x12” B&C neodymium (custom for DV Mark)

Speaker power handling: 150W (AES standard) - impedance 8 ohm

Size (mm): 628 (w) x 465 (h) x 272 (d)
Size (inch): 24.72” (w) x 18.31” (h) x 10.71” (d)
Weight: 15.9 kg / 35.05 lbs


Product IDDV-MARK-40-112-COMBO