Overview
The new Silent Brass Pickup Mute is designed to be significantly smaller and lighter than previous models to improve the balance when playing, yet it offers approximately the same muting efficiency along with stable pitch over a wide range and unrestricted breath flow.
Features
Lightweight and Compact
The new Silent Brass Pickup Mute is designed to be significantly smaller and lighter than previous models to improve the balance when playing, yet it offers approximately the same muting efficiency along with stable pitch over a wide range and unrestricted breath flow.
Adjustable Pitch and Playing Feel
An adjustable rod allows the position of the mute head to be raised or lowered inside the bell while playing. This gives you the ability to customize the feel and the pitch to find the perfect fit for your own instrument and playing style. In addition, this allows the mute to be adjusted for a wide range of bell sizes.
Disassemble to Compact Size
The disassembled mute body halves can be stacked for compact storage.
*Do not stand the instrument on its bell when the mute is installed.
Specs
Pickup Mute™
Dimensions (Diameter x Length) | 210 x 395 mm (8-1/4" x 15-9/16") |
---|
Weight | 750 g (1 lbs. 10 oz.) |
---|
Internal Microphone | Electric condenser microphone |
---|
Pickup Output Jack | Mini phone jack |
---|
Nominal Level | -25dB~-35dB |
---|
Brass Resonance Modeling™ | Yes |
---|
Accessories
Included Accessories | Cable, Owner’s Manual, belt |
---|
Please Note
- In some cases, the Pickup Mute may not fit instruments that have significantly different bell diameters and/or shapes. Please check before purchasing.
- The Pickup Mute is not compatible with Marching Mellophones, Marching French Horns, Alto (Tenor) Horns, or Baritones.
- The SILENT Brass mute for Trombone (SB5X) and the Pickup Mute (PM5X) are not compatible with Alto Trombones or Bass Trombones.
- The SILENT Brass mute for Euphonum(SB2X) and the Pickup Mute (PM2X) cannot be used with alto horn (tenor horn) and baritone.
- The SILENT Brass mutes for Flugelhorn (SB6X) and the Pickup Mute (PM6X) protrudes 3-4 cm from the bell.
- For information on compatibility with Yamaha brass instruments and cases please refer to the "Compatibility Table".
- Always remove the Pickup Mute from the instrument if the instrument is to be stored for an extended period of time.
- Do not connect the PHONE jack to a microphone input jack (or combined mic/line input) on a computer, etc., that also supplies power to the connected device (plug-in power).
- Please note that Brass Resonance Modeling is only available when the STX-2 Personal Studio is combined with a PM1X/2X/3X/5X/6X/7X Pickup Mute. It is not available with any other Personal Studio or Pickup Mute models.