Experience the Evolution of SILENT Brass.
Pickup Mute™ for Flugelhorn (with Brass Resonance Modeling)
The Pickup Mute™ combines a high-performance mute with an internal microphone to pickup sound. Significantly smaller and lighter than previous versions, the mute offers superior muting performance, delivers excellent intonation over a wide pitch range, and natural playability. A new compact design now lets you put your instrument in its case with the mute in the bell.
* Please note that the Pickup Mute™ may not fit some instruments with significantly different bell shapes or bell diameters. Please check before purchasing.
Easy To Attach And Remove
New mutes are designed to attach and remove smoothly and easily.
Fits Neatly Inside the Bell
A new compact design now lets you put your instrument in its case with the mute in the bell.
* Depending upon instrument type and model it may not fit in some cases. Please check the Compatibility Table for more information.
So Light You’ll Forget It's In Your Horn
Significantly lighter than previous models, these new mutes offer better instrument balance when in the bell and greatly reduce stress when playing.
Specially Designed Mini Microphone
Microphone performance, its mounting position, and the surrounding mute design were all optimized to bring out the full potential of Brass Resonance Modeling.
- Dimensions (Diameter x Length) 129 × 143mm (5-1/16" x 5-5/8")
- Weight 130g (4.6 oz.)
- Internal Microphone Electric condenser microphone
- Pickup Output Jack Mini phone jack
- Nominal Level -25dB～-35dB
- Brass Resonance Modeling™ Yes
- Included Accessories Cable, Owner’s Manual
In some cases, the Pickup Mute™ may not fit instruments that have significantly different bell diameters and/or shapes. Please check before purchasing.
The Pickup Mute™ is not compatible with Marching Mellophones, Marching French Horns, Alto (Tenor) Horns, or Baritones.
The SILENT Brass™ mute for Trombone (SB5X) and the Pickup Mute™ (PM5X) are not compatible with Alto Trombones or Bass Trombones.
The SILENT Brass™ mutes for Flugelhorn (SB6X) and the Pickup Mute (PM6X) protrudes 3-4 cm from the bell.
The Pickup Mute™ cannot be stored in the cases of French Horns with detachable bells.
For information on compatibility with Yamaha brass instruments and cases please refer to the "Compatibility Table".
Always remove the Pickup Mute™ from the instrument if the instrument is to be stored for an extended period of time.
The PHONES jack on the Personal Studio™ STX is for stereo output (do not use it for mono output).
Do not connect an earphone with microphone headset or similar device that has a 4-contact plug to the Personal Studio™. The use of such a device can result in severely degraded balance and sound.
Do not connect the PHONE jack to a microphone input jack (or combined mic/line input) on a computer, etc., that also supplies power to the connected device (plug-in power).
If you want to use the jack as an external output, do not connect anything to the AUX IN jack.
Please note that Brass Resonance Modeling™ is only available when the STX Personal Studio™ is combined with a PM3X/5X/6X/7X Pickup Mute™. It is not available with any other Personal Studio™ or Pickup Mute™ models.
AA batteries are not supplied. Please purchase separately.
SILENT Brass™, Personal Studio™, Pickup Mute™, Brass Resonance Modeling™, and SILENT Brass™ logo are all trademarks owned by the Yamaha Corporation.