The L2t can be used as a "master" speaker to the Line 6 L2m (an active L2t with no built in mixer) so you can have a portable PA comprising of just two speaker units. Equally, it can be used independently as a FOH speaker or a stage monitor: simply feed the L2t with a line level input as you would from a traditional mixer. To realise the full potential of a Line 6 StageSource system, the L2t can be hooked up with Line 6 Link networking which will allow you to control the DSP processing of all the speakers in your rig at the same time.
DSP enables the StageSource speakers to adapt to their application; whether that be as a front-of-house main speaker, a monitor, or to reinforce the backline for one instrument or a group.
Integrated Multi-channel Mixer with Effects
The L2t can function as a self-contained live sound solution. With a full-featured onboard mixer including multiple inputs for microphones, instruments, external mixers and MP3 players, L2t delivers all of the tools you need for great live sound.
Fast Networking via L6 LINK
In live sound situations where two or more speakers are needed, StageSource products use a proprietary digital networking protocol called L6 LINK to simplify setup. Loudspeakers will automatically self-configure, pan stereo signals, adjust Smart Speaker modes and perform system-wide optimization. Add StageSource L3s subwoofers to the mix and the system automatically sends them the summed signals and sets the crossovers. When combined, Line 6 live sound products form an intelligent ecosystem that sets up faster and helps you sound your best.
Designed to Be Different
The 800-watt, two-way, bi-amped speaker system and tour-grade plywood enclosure combine to deliver great power and reliability. The innovative multi-function design makes StageSource L2t perfect for a wide variety of applications-stacked on the floor or stage, pole-mounted, positioned horizontally as a floor monitor, used as instrument backline with Virtual Tilt-back, or flown with the integrated M10 suspension points.
Orientation and Pole-mount Sensors
StageSource L2t uses an internal accelerometer, optical sensors and DSP to accelerate setup and optimize the sound of your system. Based on the information the system detects, it selects the right Smart Speaker mode for the application, and automatically adjusts its performance.
Integrated Feedback Suppression
Since feedback can ruin a performance, StageSource L2t uses intelligent 12-band feedback suppression to identify the problem frequencies and adjust levels without affecting the overall sound.
L2t feedback suppression continuously analyzes the audio signal, identifying frequencies that have the characteristics of feedback (steady frequencies with few overtones, rising in amplitude) and then applies a narrow notch filter to remove the offending frequency. L2t feedback suppression can remove up to 12 independent feedback frequencies. You can set the feedback analyzer to one of three modes, depending on how aggressively the analyzer will seek out potential feedback frequencies.
Multi-function Design and Scalability
Multi-function design combined with powerful Smart Speaker modes and digital networking provides true scalability whether you're using a single L2t as a standalone PA or multiple L2t and L2m speakers as main PA, monitors and backline. Add StageSource L3t/L3m loudspeakers and L3s subwoofers to customize a configuration that meets your live sound or installation needs.
StageSource L2t is ready for whatever the road can throw at it. The robust enclosure is constructed of heavy-duty plywood and a tour-grade steel grille with protective screen backing that protects the drivers from impact damage.
If you need to fly the speakers, each StageSource L2t features four professional M10 suspension points with a pull-back.